BestTrack Champ Timer Betriebsanleitung

Stöbern Sie online oder laden Sie Betriebsanleitung nach Nein BestTrack Champ Timer herunter. BestTrack Champ Timer Operating instructions Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 25
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Last Revised 1/1/15
BestTrack
®
Champ Timer
Finish Line Timer
Assembly Manual and COMMAND MANUAL
VERSION 4.0
Timer Manufactured By:
SRM Enterprises, Inc., Producers of BestTrack
®
Pinewood Derby
®
Tracks
P.O. Box 53, Forest City, IA 50436
641-585-2299 or toll free 1-888-582-2299
Copyright © 2008-2015 SRM Enterprises, Inc.
Timer Electronics By:
eTekGadget, 36 Matuk Drive, Hyde Park, NY 12538
(845)-229-5189
Copyright © 2004-2015 eTekGadget. All Rights Reserved.
www.eTekGadget.com
1
IMPORTANT! Use only the 12V power supply
supplied with your timer! Wrong power supply
voltage will damage your timer & void the warranty!
See
Troubleshooting
Tips on page 10
IMPORTANT! Unplug
any solenoid start gate
before using the
Linesetup program with
your timer.
Seitenansicht 0
1 2 3 4 5 6 ... 24 25

Inhaltsverzeichnis

Seite 1 - Champ Timer

Last Revised 1/1/15 BestTrack® Champ Timer Finish Line Timer Assembly Manual and COMMAND MANUAL VERSION 4.0 Timer Manufactured By: SRM Enterpr

Seite 2

10 Notes on using a Serial to USB Adapter If you are using a Serial to USB adapter to hook up your Champ timer to a laptop or other computer, be sur

Seite 3

11 3 Command Summary This is a complete list of the commands that are available in the Champ Timer. All commands are Character strings ending wit

Seite 4 - The Wires When

12 3.1.5 Set or Read Variables • on Set/Read number of lanes The total physical number of lanes on your track.  on<cr> Reads the curre

Seite 5

13 • of Set./Read photo finish trigger delay Set the delay up to 255 milliseconds. • ow Set/Read photo finish trigger length Set the trigger

Seite 6

14 3.1.6 DTX000 mode supported This is a simple protocol that is supported when you send an ox1<cr> command to the timer. The Champ Timer w

Seite 7

15 3.2 Detailed List of commands: 3.2.1 od#<cr>:Set/Read number of decimal places ComputerFinish Line Sends od<cr> Read numb

Seite 8

16 3.2.3 ol[#]<cr>:Set/Read lane character This command sets the character sequence type that will be used to indicate the lane numbers in th

Seite 9

17 3.2.4 om[#]<cr>:Set/Read number of lanes to be used This command masks off the lane specified until it is reset by either an ‘om0’ command

Seite 10 - TROUBLESHOOTING:

18 3.2.5 on[#]<cr>:Set/Read number of lanes This command sets the number of lanes there are physically installed on the track. This command

Seite 11 - 3 Command Summary

19 3.2.6 op[#]<cr>:Set/Read place character This is the character that will be used to indicate first place in the response to the ra, rg an

Seite 12 - 3.1.5 Set or Read Variables

2 The Champ Timer Finish Line Overview We thank you for purchasing the BestTrack ® Champ Timer Finish Line system. This manual will assist you with

Seite 13

20 3.2.7 or[#]<cr>:Set/Read automatic reset delay This command allows you to disable the automatic reset so that it must be reset manually or

Seite 14 - 3.1.6 DTX000 mode supported

21 3.2.9 ow<cr>:Set./Read photo finish trigger length This command sets the duration of the photo finish signal. Some frame capture devices w

Seite 15

22 3.2.11 ra<cr>:Force end of race, immediately return results, then reset ComputerFinish Line Sends ra<cr> Force end of race

Seite 16

23 3.2.14 rp<cr>:Return results from previous race ComputerFinish Line rp<cr> Finish Line  Computer A=0.851 # B=0.497 “ C=0.266 ! D=

Seite 17

24 Appendix A: Race Result String If the rg command is sent to the Champ Timer Finish Line, a result string will be returned after the race has be

Seite 18

25 As above, the letters (A..H) indicate the lanes, beginning at the lane opposite the wires if normal direction is selected. The race times are dis

Seite 19

3 2 General Operating Instructions The Champ Timer Finish Line System may be set up for use as a race timer or it may be set to test mode to test th

Seite 20

4 2. Slide two ¼-20 X 1” long hex head bolts (included) in the outer mounting slots of the first & last lanes of your timer section of track.

Seite 21

5 4. Align the sensor housings on each foam block so they fit into the timer holes punched in the middle of each lane. The foam block acts as a spr

Seite 22

6 7. Plug the power supply into the mating connector on the Champ Timer unit. IMPORTANT! Use only the 12V DC power supply supplied with your time

Seite 23 - 3.2.17 r<cr>: Reset

7 If you do decide to mount the start switch please note the following wiring information. WIRING INFORMATION: The supplied sensor switch has three

Seite 24

8 2.2 Run the Champ Timer Setup Program IMPORTANT! Unplug any solenoid start gate while using the Linesetup program. We supply the Champ Timer Setu

Seite 25

9 2.3 Setup the Champ Timer for use with various race management software packages. GrandPrix Race Manager V5.0 and above– Select the Champ or Sma

Kommentare zu diesen Handbüchern

Keine Kommentare